Your engine turns over, and can not start. If your mind in a million directions considering what it might be, you should remember the K.I.S.S. Method (Keep It Simple Stupid.) There are plenty of reasons that a modern motor will start and can not crank up. Don’t worry about all those hundreds of parts that could cause this issue. Focus instead around the basics.
Does your engine have fuel and is there spark? Those are the only two things you engine needs to run. First check to see it if your car has any spark. Remove a spark plug and put it into the plug wire or coil that went on surface of it. Hold the bottom from the spark plug on the good ground like the valve cover or exhaust manifold, and have someone crank the motor. If you see a spark then go to testing the fuel, if you don’t see a spark then it’s time for you to chase that issue.
You’ve spark then find a can of starting fluid or flammable brake cleaner to spray into the air intake, and do not use paint. Since you have a spark and you’re simply now introducing fuel, your engine should start. Which means your vehicle isn’t delivering fuel to your motor. Begin to see if your vehicle is delivering fuel through the fuel pump, and come with the no fuel trouble tree here.
If you didn’t have any spark you may be looking at a number of issues. Begin slowly and find out if you’re getting spark using your coil a treadmill coil pack. For those who have no spark from a coil then you will need to get a wiring diagram for your vehicle and appearance you power and grounds.
A number of this may seem very complicated, but it is only as hard while you allow it to be. Find some clear to see info on electrical diagnosis and learn how easy it’s to really understand. One you realize you electrical system in your car you are able to fix just about anything.
Comments Off